![]() |
| This section displays pricing for
some of TridentMarine's Wet Exhaust Systems. No Shipping is included.
Pricing may change without notice, please call. Terms are CIA via company
or personal check or wire transfer (I apologize that we do not accept credit
cards) to include the price of the parts as well as the shipping amount.
Please let me know if you need any additional pricing or if you would like
me to estimate the UPS charges.
PLEASE NOTE-25% RESTOCK FEE + SHIPPING Please be sure of what you want to order. Regards, Mark Coulson |
| Discussion:
Wet exhaust systems have decided advantages over dry exhaust systems. They are quieter, cleaner and cooler; and do not pose a fire or burn hazard (eliminating the need for insulation beyond the water injection point). Today, most pleasure boats with inboard engines (for power, auxiliary, generator) have wet exhaust systems. Typically, raw water is pumped from the engine intake seacock and strainer; through a heat exchanger, possibly oil cooler(s) and water injection nipple or mixing elbow at the exhaust manifold; and it’s dumped with the exhaust gas (cooled from 1100° F. + to less than 212°F. on most engines) into the wet exhaust piping and out the stern. Most commonly the latter is a combination of flexible rubber exhaust hose, bellows & elbows; sometimes fiberglass or stainless steel pipe (at least for connectors); and mufflers or silencers. Flexible hose, bellows and elbows are easier and simpler to run than rigid pipe. They’re not subject to corrosion or stress cracking; and they absorb more engine movement, vibration and noise. While the highest quality black rubber exhaust withstands maximum continuous temperatures up to 250°F., some high performance engines emit wet exhaust at 300° to 500° F. Here only silicone rubber can be used. |
| COMPONENTS | CONSTRUCTION | SIZES | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
EXHAUST HOSE
![]() |
200-BLACK HT
Black 100% EPDM Rubber,
Multi-Ply Polyester Reinforced, Heavy Wall
250-BLACK HT Black
100% EPDM Rubber, 2-Ply Polyester
252-BLACK HT Black
Corrugated 100% EPDM Rubber, 2-Ply
202V-BLUE VHT
Glossy Blue 100% Silicone Rubber,
202X-RED XHT Glossy
Red 100% Silicone Rubber,
|
1/2"
to 16" ID |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
EXHAUST 90° ELBOW
![]() |
TRL-90-BLACK HT
Black 100% EPDM Rubber-Molded, 2" to 10" ID w/4 Step Up Sizes Available
290V-BLUE VHT
Blue Silicone Blended Rubber-Moulded, 2" to 10" ID w/4 Step Up Sizes Available
290X-RED XHT Lava
Red 100% Silicone Rubber, 2" to 10" ID w/4 Step Up Sizes Available
292V-BLUE VHT Glossy Blue 100% Silicon Rubber, Multi-Ply Polyester Reinforced, 2" to 4" ID 292X-RED XHT Glossy
Lava Red 100% Silicone Rubber, Multi-ply Nomex® Reinforced 2" to 4"
ID
|
2"
to 10" ID |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
EXHAUST 45° ELBOW
![]() |
TRL-45-BLACK HT
Black 100% EPDM Rubber-Moulded, 3" to 10" ID
240V-BLUE VHT
Blue Silicone Blended Rubber-Moulded, 3" to 10" ID
240X-RED XHT Lava
Red 100% Silicone Rubber, 3" to 10" ID
242V-BLUE VHT
Glossy Blue 100% Silicon Rubber, Multi-Ply Polyester Reinforced, 2" to
4" ID
242X-RED XHT Glossy
Lava Red 100% Silicone Rubber,
|
3"
to 10" ID |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| EXHAUST BELLOWS
1&2 HUMPS ![]() |
TTH-BLACK HT
1 Hump, Black 100% EPDM Rubber-Moulded, 3" to 10" ID w/6 Step Up Sizes
Available
270V-BLUE VHT
1 Hump, Blue Silicone Blend Rubber-Moulded, 3" to 10" ID w/6 Step Up Sizes
Available
270X-RED XHT 1
Hump, Lava Red 100% Silicone Rubber-Moulded, 3" to 10" ID w/6 Step Up Sizes
Available
272V-BLUE VHT 1 Hump, Glossy Blue 100% Silicon Rubber, Multi-Ply Polyester Reinforced, 2" to 12" ID 272X-RED XHT 1 Hump, Glossy Lava Red 100% Silicone Rubber, Multi-ply Nomex® Reinforced 2" to 12" ID 274V-BLUE VHT 2 Hump, Glossy Blue 100% Silicon Rubber, Multi-Ply Polyester Reinforced, 2" to 16" ID 274X-RED XHT 2
Hump, Glossy Lava Red 100% Silicone Rubber, Multi-ply Nomex® Reinforced
2" to 16" ID
|
2"
to 10" ID |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
EXHAUST T-BOLT CLAMPS
![]() |
720 Stainless
Steel T-Bolt Clamps
3/4" wide 301 S/S Band 305 S/S Bolt (2.5" or 3.5" Long) 18-8 S/S Lock Nut |
Fits
1" to 16" ID Hose, Bellows & Elbows |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
EXHAUST TUBING CONNECTORS
![]() |
260 Fiberglass
Marine Wet Exhaust Connectors for all Flexible Rubber Exhaust Components
-- Marine UL Listed -- ABS Type Approved
+250° F. Max Continuous
260V Fiberglass Marine Wet Exhaust
Connectors for all Flexible Rubber Exhaust Components -- Marine UL Listed
-- ABS Type Approved
| 1" to 16" OD |
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Marine Exhaust Systems of Alabama, Inc.